Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
INSTALLING THE SLIDING TABLE
See Figure 14.
To install the sliding table:
„ Grasp the table firmly and set the rear rollers on the front
of rails.
„ Holding the table parallel with the frame, push the table
toward the back of the saw.
„ When the table lock lever reaches the stop on the front
rail on the right hand side of the frame, pull the lever
out and hold it out until the lock has passed the stop.
Release the lever.
„ Slide the table along the rails until the final rollers engage
the rails.
To lock sliding table:
„ Pull the table lock lever out and turn 90˚ counterclockwise.
„ Release the lever.
NOTE: When the sliding table is installed, and you push
the table, it will "click" into place. This is the table lock
lever snapping into a hole in the frame locking the table
in place.
To unlock the sliding table:
„ Pull the table lock lever out and turn 90˚ clockwise.
TILE CUTTING WHEEL
For maximum performance and safety, it is recommended
that you use the 8 in. cutting wheel provided with your
saw. Additional cutting wheels of the same high quality are
available at your local dealer.
WARNING:
Do not use cutting wheels rated less than the no
load speed of this tool. Failure to heed this warning
could result in personal injury. Do not use wheel
with cracks, gaps, or teeth.
INSTALLING THE CUTTING WHEEL
See Figure 15.
WARNING:
An 8 in. tile cutting wheel is the maximum wheel
capacity of the saw. Never use a wheel that is
too thick to allow outer washer to engage with
the flats on the arbor. Larger wheels will come in
contact with the cutting wheel guard, while thicker
wheels will prevent the arbor nut from securing the
wheel on the arbor. Either of these situations could
result in a serious accident and can cause serious
personal injury.
„ Unplug the saw.
„ Lock table in front position.
WHEEL
WRENCH
WATER
NOZZLES
15 — English
LOCK
TABLE LOCK
LEVER
ROLLERS
OUTER
WATER
WHEEL GUARD
6 MM HEX
NOZZLE
WRENCH
INNER
OUTER
WASHER
WASHER
CUTTING WHEEL
ARBOR
NUT
CUTTING
WHEEL
ARBOR
UNLOCK
BYPASS
SAW
FRONT
SLIDING
TABLE
Fig. 14
KNOB
GUARD
Fig. 15
Publicidad
