Maintenance and Care
Maintenance
(9.9)
• Check the tyre pressure every 4 weeks. Check all of the tyres for
wear or damage.
• Check the brakes approximately every 4 weeks to make sure
that they are working properly and easy to use.
• Change tyres as you would an ordinary bicycle tyre.
• All of the joints that are critical to using your wheelchair safely
are self-locking nuts. Check every three months to make sure
that all bolts are secure (See the page on torque). Self locking
nuts should only be used once and should be replaced after
single use.
• Use only mild household cleansers when your wheelchair is dirty.
Use only soap and water when cleaning the seat upholstery.
• If your wheelchair should ever get wet, please dry it after use.
• A small amount of sewing-machine oil should be applied to
quick-release axles approximately every 8 weeks. Depending on
the frequency and type of use, we recommend taking your
wheelchair to your authorised dealer every 6 months to have it
inspected by trained personnel.
CAUTION:
Sand and sea water (or salt in the winter) can damage the bea-
rings of the front and rear wheels. Clean the wheelchair
thoroughly after exposure to these conditions.
Technical Data
(10.300)
Total width:
• With standard wheels including handrims, narrow fitting:
Seat width + 19,5 cm
• With drum brake wheels, handrims, narrow fitting:
Seat width + 20 cm
Folded dimensions:
• With standard wheels: approx. 33 cm
• Without standard wheels: approx. 17 cm
Weight in kg:
• Wheelchair 16 kg
• Footrest (pair) 1.5 kg
• Standard sideguard 1.8 kg
• 24" rear wheel (solid) 1.4 kg
Maximum load:
Approved to loads up to 125 kg (20 stone)
Breezy Elegance settings
Position of per-
Position
forated plate
of caster
on rear wheel
fork
5
Y3
6
Y3
4
Y3
4
Y2
3
Y2
1
Y1
2
Y1
10
BREEZY ELEGANCE · Rev.A
Adjustment
Adjustment
of caster
of caster
fork A
fork B
Height
P2
F4/F2
42cm
P3
F4/F3
43cm
P5
F5/F2
47cm
P6
F5/F3
47cm
P5
F5/F2
49cm
P5
F5/F2
51cm
P5
F5/F2
51cm
Nameplates / Guarantee
Rating plate
(11.1.3)
The rating plate is located on the cross-brace tube or
cross-frame tube and also on the back of the user guide.
This plate gives the exact type descriptions as well as other
technical information. When ordering spare parts or making
a complaint please give the following information
• Serial number
• Order number
• Month/Year
Guarantee
You have purchased a high-quality Breezy product. As a
sign of our gratitude, we are providing you with a 5-year
guarantee on all frame components and the cross-tube
assembly as well as 2 years on all other parts. We take no
responsibility for any damage resulting from inappropriate
or unprofessional assembly and/or repairs, through neglect
and wear and tear, as well as any alterations to wheelchair
components by the user or by any third party. In such
cases, our product responsibility is voided.
Custom wheelchairs cannot be exchanged.
Torque
(12.1.1)
415.1
The torque for the screws shown:
10 Nm castor and axle adapter screws must be secured with
Loctite again after they have been loosened.
The torque for all screws is 7 Nm.
Front
Seat
Seat
Angle
0°
3°
3°
6°
3°
0°
3°
416.1
415.2
416.2
1
2