Fiorenzato XGi Serie Manual Del Usuario página 49

Series
6.1.3 Thoroughly cleaning the grinding blades
EVERY MONTH: thoroughly clean the grinding blades
The grinding blades should be thoroughly cleaned
once a month (or when necessary), using specifi c
cleaning products for grinder-dosers, which are readily
available on the market (e.g. PULY GRIND coffee
grinder cleaner).
• Thorough cleaning must be carried out after
the end-of-shift cleaning. No coffee must be in
the machine and the supply hopper must not be
attached.
• The grinding blades can be cleaned by pouring a
dose of the product into the (completely empty)
grinding chamber and starting the grinding
process. During grinding, the product (in grains
or crystals) regenerates the grinding blades by
completely removing all coffee, scale, mould and
greasy deposits from their surfaces, absorbing oil
and destroying any rancid deposits without leaving
any residues.
• In this way, regeneration takes place without the
need to disassemble the grinding blades and
without having to change the set grinding position.
6.1.4 Shutting down the grinder-doser
If the machine is not used for long periods of time (e.g. festive periods, holidays, etc...),
we recommended carrying out the following cleaning operations to keep it in good
condition and avoid any potential problems when restarting it.
WHEN NECESSARY: cleaning and shutting down the machine.
• The grinder-doser should be thoroughly cleaned as
described in Par. 6.1.1.
• Thoroughly clean the grinding blades as described
in Par. 6.1.3.
• Disconnect the power supply cable from the power
socket.
• Cover the machine with a cloth to prevent any
accumulation of dust and dirt.
Fiorenzato | Series_00 Ed. 04/2022
EN EN
6.1.5 Replacing the grinding blades
The scheduled deadline for replacing the grinding blades is set by Fiorenzato M.C. S.r.l.
depending on the type of grinders and the grinder-doser model.
At the end of the time set by the manufacturer, the warning icon "
display, indicating that they need to be replaced.
ATTENTION! Replacement of the grinding blades must be entrusted to
a specialised technician or the manufacturer's authorised dealer, who
will replace them with original spare parts. When replacement has been
completed, the qualifi ed operator/dealer in possession of the "Administrator
Password" (§5.4.3.16)for accessing the "Safety Settings" menu will also reset
the grinding blade counters, check the accuracy of the scales and, if required,
calibrate them again.
6.2 Supplementary maintenance
There are no scheduled supplementary maintenance operations for the grinder-doser.
However, in the event of breakages and/or malfunctioning not covered in the section
"7 ANOMALIES - CAUSES - REMEDIES", do not intervene on the appliance yourself but
inform your local dealer who will contact the Fiorenzato M.C. S.r.l. service department to
solve the problem.
43 / 49 44 / 49
Series
" appears on the
Fiorenzato | Series_00 Ed. 04/2022