Fiorenzato XGi Serie Manual Del Usuario página 52

Series
8 REQUESTING SPARE PARTS
If it is necessary to replace worn parts of the grinder-doser (e.g. grinding blades), the
end user (e.g. bartender/restaurateur, etc.) must contact their local distributor, a direct
intermediary with Fiorenzato M.C. S.r.l., and communicate the grinder-doser model in
their possession for identifi cation and to request the supply of original spare parts. Only
authorised local distributors will then be given the opportunity to register on our website
to order the required spare part.
To request spare parts, local distributors must:
• Visit www.fi orenzato.com, enter the spare parts section and select the grinder-doser
model indicated by the end user.
• Access the reserved area by entering their credentials on the form provided (at the
fi rst login, they must register by entering their identifi cation data).
• Select the necessary spare parts using the exploded view tables of the product on
the portal.
• Follow the guided procedure to complete their order and send it to Fiorenzato M.C. S.r.l..
• The local distributor will be contacted by personnel of Fiorenzato M.C. S.r.l., who will
take care of the request.
ATTENTION! Please note that the replacement of grinding blades and,
in general, of all internal parts of the grinder-doser must be carried out by
specialised technicians.
ATTENTION! Fiorenzato M.C. S.r.l. is not liable for any personal injury and/
or damage to the appliance caused by the replacement of components with
non-original spare parts by unqualifi ed persons.
Fiorenzato | Series_00 Ed. 04/2022
EN
49 / 49