Carl F. Bucherer MANERO CENTRAL COUNTER Manual Del Usuario página 4

SET THE DATE/SECURE THE CROWN
WARNING
Do not use the quick set function for the date
between 8:00 p.m. and 2:00 a.m. because there is
no assurance that the date will change at midnight
after that; it may not change for another 24 hours.
1 Pull the crown into posi-
tion 1.
2 Set the current date by rotat-
ing the crown counterclock-
wise.
3 Push the crown back to the
initial position.
8 | E N G L I S H
MEASURE TIME (CHRONOGRAPH)
The chronograph can be used to measure time
intervals for up to 1 hour exactly to 1/ 8 second. The
time measured can be read using the seconds and
minutes counters.
1 Start measuring time using
the P1 pusher.
The seconds counter is
in motion.
2 To stop measuring time, press
the P1 pusher again and read
where it stopped.
3 Use the P2 pusher to reset all
the counters to zero.
TACHYMETER FUNCTION
The tachymeter is used to determine speed. It
measures the elapsed time needed to cover a spe-
cific distance. The distance covered must be
known so that the time can be stopped at an exact
time to determine the exact speed.
1 Start the tachymeter
function by using the P1
pusher. The seconds
counter is in motion.
2 To stop measuring time, press
the P1 pusher again. The sec-
onds counter stops immedi-
ately.
3 Read the average speed
by optical extension of the
seconds counter.
E N G L I S H | 9