Publicidad
Idiomas disponibles
Idiomas disponibles
Connection of accessories
7.4. Electric vehicle detector
CAUTION
To install the kit it is necessary to access the unit, following the safety instructions given in this manual. The
unit must not be powered.
1.
Mount the electric vehicle detector in the position shown in the figure.
2.
Connect the detector to the wiring kit included in this kit. The start and end points are marked on each
cable. This helps to connect each one. Route all the cables through the ducts installed for this purpose.
3.
The identifier of the detector is –BG7. It is marked in this way on the cables and the following cable
connection points are as follows.
a. The distribution terminal blocks are –XD1 and –XD2.
-XD2
-XD1
300000772 - Monterings- och bruksanvisning
Ingeteam
EN
ES
FR
IT
SV
45
Publicidad
