Charging Process; Charging Process With Authentication - Ingeteam RAPID 60 Manual De Instalacion Y Uso

Ingeteam

11.3. Charging process

Depending on the client's requirements, the charging process will start with or without authentication. The process
for both cases is described below.

11.3.1. Charging process with authentication

Starting the charge process
1. Check that the charging station is in awaiting vehicle status with the green light on.
2. If you have an ID card, place the card next to the reader located on the area below the display. In the
case of a correct reading, the station switches to awaiting charge status. If the charging manager uses an
app to manage the charge, follow the instructions on the app to start the process.
3. Connect the vehicle to the station.
58 300000772 - Monterings- och bruksanvisning
Operation