Publicidad
Idiomas disponibles
Idiomas disponibles
Ingeteam
11.3.2. Charging process without authentication
Starting the charge process
1.
Connect the vehicle to the recharging station.
2.
The charging starts. The lighting remains blue, fixed if there is consumption and flashing if there is not.
Ending the charge process
1.
Disconnect the connector from the vehicle side.
2.
The charging process stops.
11.4. Downloading the receipt (Eichrecht certified units)
Charging point operators will permit the receipts stored in their system to be downloaded. For further information,
contact the charging point operator.
There may be small differences between the energy data shown on the wattmeter display, visible from the exterior
of the charging point, and the energy data registered on the receipt. These differences are due to the fact that,
on the display, the accumulated energy value is displayed to two decimal places (10Wh), and the value given for
invoicing is only to one decimal place, 1Wh.
60
300000772 - Monterings- och bruksanvisning
Operation
Publicidad
