klover DUAL AIR Instrucciones Para La Instalación, El Uso Y El Mantenimiento página 59

INSTALLATION
6.7.2 CONNECTING THE ROOM THERMOSTAT OR ROOM SENSOR
The table below describes the operation of the terminal blocks found on the appliance's control panel.
Description
(1)
Main room
(*) Connect a non-powered room thermostat to manage a simple dry contact and, preferably, with a settable hysteresis value.
CS.DLA.IST_EN_Rev. 1.0_11-23
Type of control
Only with room thermostat (*)
Action
With the contact CLOSED, the appliance continues to work at the set
power, regardless of the SET ROOM (
of any other room thermostats or sensors connected.
With the contact OPEN, the appliance enters the modulation mode,
provided that the room temperature set in SET ROOM (
fulfilled and that any other room thermostats or sensors connected
are fulfilled.
button) value and the status
+
button) is
+
EN
17