Keyline 994 LASER Manual De Uso Y Mantenimiento página 46

Note: The download may require some minutes, it is necessary
to wait for the process to end.
8. At the end, remove the flash drive and connect it again to
the machine.
Note: The downloaded package can be used only by the ma-
chine with which the update procedure was started.
9. After connecting the USB flash drive to the machine, press
NEXT. The updates shall be analysed and loaded in the ma-
chine's memory.
During this phase, messages may appear stating the
presence of errors in the package, the absence or inva-
lidity of the licence. In these cases, check that you have
used the same USB flash drive that you connected to the
machine at the beginning of the update process. Contact
the Keyline Service Centre to solve any problems.
10. At the end of the download a message confirms that the
data have been received and can now be installed.
11. Disconnect the USB flash drive connected to the machine
and press the "INSTALL" button. To annul the operation,
press CANCEL.
12. The programme shall reboot and the update software ex-
ecuted; the user might be required to turn off and reboot
the machine.
13. Follow the instructions and wait until the end of the pro-
cedure, whereupon the most recent versions of the soft-
ware and database shall be available.
12 Keyline S.p.A.
SETUP
5.4.3 Special
Warning:
This update procedure may be carried out only upon re-
quest by Keyline.
How to proceed:
• Pressing the USB button, the programme will ask you to in-
sert a USB flash drive containing the data for the update.
Note: The data for this kind of update can be provided EXCLU-
SIVELY by Keyline.
It is not possible to update the machine with packages
downloaded from "Keyonline" of from the Keyline
server.
• After inserting the flash drive, press YES to update the ma-
chine.
• To annul the operation, press NO.
• Follow the instructions to the end of the procedure.
994 LASER Man. cod. B409619FG Copyright by Keyline - Italy