Sauder 1736-100 Instrucciones De Montaje página 36

16
SMALL 1" FLAT HEAD SCREW (CCC)
(4 used in this step)
- Position the KEYBOARD SHELF (P) as shown. Follow the diagram.
- Fasten the STRAIGHT RIGHT DRAWER SLIDE (HH) and STRAIGHT LEFT DRAWER SLIDE (II) to the
KEYBOARD SHELF (P). Use two SMALL 1" FLAT HEAD SCREWS (CCC) through each DRAWER SLIDE and
into the pre- -drilled holes in the edges of the KEYBOARD SHELF.
NOTE: Be sure the roller end of each SLIDE is positioned toward the unfinished edge of the
KEYBOARD SHELF.
- Insert the CORD CLIP (RR) into the hole in the KEYBOARD SHELF (P). The CORD CLIP is used to hold your
keyboard cord against the KEYBOARD SHELF.
1736--100
STRAIGHT LEFT
DRAWER SLIDE (II)
Roller
end
KEYBOARD
SHELF (P)
www.sauder.com/services
Unfinished
edge
Finished
surface
CORD
CLIP (RR)
STRAIGHT RIGHT
DRAWER SLIDE (HH)
Roller
end