HOLZMANN MASCHINEN ZFS600 Instrucciones De Servicio página 18

13.1.3 Mounting the decive
14 OPERATION
14.1 Before Each Use!
Do not use machine if you notice a malfunction or damage!
Check the following points daily or before each use of the machine:
 Check the machine for damage.
 Make sure all screws and bolts are tightened.
Do not use the machine, if you notice any malfunction or damage!
14.2 Operating the Machine
14.2.1 Setting the end stops
HOLZMANN MASCHINEN GmbH
Four holes are provided in the frame for fixing the
device.
Mount the device (1) as shown on a work surface (2)
and secure it with suitable screws (not included).
- The device (1) must be mounted flush with the front
edge of the workbench.
- Make sure that there is enough space behind the
device (1) to accommodate the longest timber length
CAUTION
www.holzmann-maschinen.at
Use a set square to draw a pencil line halfway
across the first finger of the template
• The line must be square to the edges of the
template
Line up the inside edge of the left
horizontal stop with the line you
just drew on the template.
• Use a set square to ensure the
stop is square to the jig.
OPERATION
18
ZFS600