HOLZMANN MASCHINEN ZFS600 Instrucciones De Servicio página 22

15 CLEANING
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the machine's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.
Therefore, remove dust and abrasion regularly with a soft, lint-free (cotton) cloth, otherwise the
hydraulic piston may wear prematurely.
16 MAINTENANCE
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
 Before each start-up, make sure that the machine is in perfect condition and functions
properly.
 Once a week check all connections for tightness.
 Regularly check whether the warning and safety labels on the machine are in perfect and
legible condition.
 Only use lubricants and original spare parts recommended by the manufacturer.
17 DISPOSAL
Never dispose of the machine, machine components or equipment in residual
waste. Observe the national disposal regulations. In certain countries retailers
are obliged to dispose of your old machine properly, when you buy a new one.
In doubt, contact your local authorities for information on the possibilities of
legally compliant disposal.
HOLZMANN MASCHINEN GmbH
NOTICE
www.holzmann-maschinen.at
CLEANING
22
ZFS600