John Bean T 7700 Manual Del Operador página 10

P/N: EAL0408G78A
P/N: EAL0424G33A
P/N: EAL0413G11A
P/N: EAL0413G12A
10
Safety
EAL0408G78A
Personal protection devices warning.
• All the devices listed on the plate must be used to operate
the equipment.
• Wear the devices indicated before operating the
equipment.
THE USE OF PERSONAL PROTECTION DEVICES
IS LAID DOWN BY THE LAW.
EAL0424G33A (symbol on Dangers Plate)
Risk of fl ying fragments during beading.
• The beading operation with the TUBELESS device can
result in fl ying objects and loud noise levels. We therefore
recommend the use of protection equipment for eyes and
ears.
• When using compressed air for the beading operation
there is the risk of the tire exploding.
• Avoid excessive pressure. Do not exceed the maximum
pressure indicated on the tire.
• The risk of explosion is also dependant on the conditions
of the tire. Check the tire before infl ating it.
EXPLODING TIRES CAN CAUSE SERIOUS INJURY
OR EVEN DEATH.
EAL0413G11A
Wheel lifter maximum carrying capacity.
The tyre weight must be known.
The plate indicates the wheel lifter carrying capacity.
•
The mechanical parts of the wheel lifter can be
•
compromised by excessive loads.
For particularly heavy tires, we recommend
•
identifying the exact weight, with a suitable
instrument, before loading on the tyre changer. Do
not use the wheel lifter if the weight exceeds the
maximum weight allowed.
Maintain a safe distance when in movement.
•
COMPLY WITH THE CARRYING CAPACITY OF THE
WHEEL LIFTER .
EAL0413G12A
Indications on the hooking point for lifting and moving
the tyre changer.
The plate indicates where to secure the tyre
•
changer in order to lift it.
Use lifting devices with an adequate carrying
•
capacity in relation to the weight of the tyre changer.
Maintain a safe distance when in movement.
•
FOLLOW THE INDICATIONS SUPPLIED FOR
MOVING THE EQUIPMENT.
IMPORTANT!! SAVE THESE
INSTRUCTIONS
....... .......
-