Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY WARNINGS
RESIDUAL RISKS
• The correct design of the equipment and the installation of adequate protections do not com-
pletely eliminate the risks for the operator. This manual contains the list of personal protection
equipment (PPE) that the employee must use. SufÏcient space is provided during the installation
phases of the equipment to limit the risks. To maintain these conditions, the areas surrounding the
equipment must be kept clean, dry, well-lit and free from obstacles. Below is a list of the residual
risks that remain on the machine.
Residual risk
Slipping or
falling
Burns or
abrasion
Electrocution
Falling
Injuries
Overturning
Refrigerant gas
EMERGENCY SITUATIONS
In case of fire, do not use water, keep CO
•
ATTENTION
and cool the motor installation compartment as quickly as possible.
• In case of gas leaks, see the dedicated sheet on page. 40
IN CASE OF EQUIPMENT MALFUNCTIONING...
If the e quipment does not work or functional or structural alterations are noted,
ATTENTION
disconnect it from all the power supplies and contact an assistance centre
authorised by the manufacturer without attempting to repair it yourself.
The use of original spare parts is recommended. The manufacturer declines from
ATTENTION
any responsibility for the use of non-original spare parts.
• To be sure that the equipment is maintained in perfect use and safety conditions, we recommend
the execution of a maintenance and inspection service by an authorised assistance centre, at least
once a year.
Description
The operator can slip due to the presence of water, oil or dirt on the floor.
The user intentionally or unintentionally touches some of the components
inside the equipment (e.g. cold trays, fins and cooling circuit tubes) without
using protective gloves.
Contact with live electrical parts during maintenance operations carried out
without disconnecting the power supply
The operator intervenes on the equipment using unsuitable systems to access
the upper part.
Specialist personnel may not properly secure the upper control console. The
latter could break off and fall.
During handling operations of the equipment and packaging using lifting and/
or handling systems that are unsuitable or with the load unbalanced
Inhalation of refrigerant gas. The type of refrigerant is shown on the
equipment characteristics plate
extinguishers available (carbon dioxide)
2
37
USE AND MAINTENANCE mod. PAPRIKA | Rev. 0
Publicidad
