Goodyear GY 7RT Manual De Instrucciones página 21

English
Owner´s manual
•
F
C
B
A
Recoil start
Implement assembly
Implements mount directly to the
flange (A) or between the attachment
and quick hitch (C).
It is necessary that the nuts (D) that hold
the implement to the machine are well
tightened.
To mount the cutter bar, lawn mower,
snow blower, etc. on them. It is
necessary to turn the handlebar 180º.
Before this, it is necessary to release the speed control rods (E) and PTO (F) from the brackets, pull the
steering column position lever from the handlebar (H) and turn it 180º.
Insert it again after choosing the ideal handlebar position.
After turning the handlebars, the rods must be inserted back into the holders; When the handlebar is
turned, the two-wheel tractor will move forward in reverse gear and reverse in 1st gear.
P.T.O.
It is a 3-prong implement with a front
lock.
It turns to the right, regardless of the
gear, and depending on the engine
speed (990 rev/1' to 3600 rev/1' of the
engine).
L
N
G
E
D
H
C
E
B
A
Electric start
A
L
G
N
F
D
C
D
21