Goodyear GY 7RT Manual De Instrucciones página 23

English
Owner´s manual
•
Gear change
1. When shifting gears to the lowest speed, you must press the clutch lever and shift gears while the
machine is running.
2. When necessary, shift to the third gear, reduce the engine speed, then press the clutch lever (B), cut off
the engine power, and then change the speed. If it is difficult to shift successfully, release the clutch lever
(B) slightly to make shifting easier.
3. Three forward speeds and two reverse speeds.
4. Pay more attention when operating the machine in the third gear (fastest speed).
5. To engage the transmission to the implement, engage the clutch lever and place the control rod in its
forward position. If engagement is not immediate, release the clutch lever (C) slightly and feel.
ATTENTION! Please note that on motocultors it is impossible to activate reverse gear
and move the rotary hoe simultaneously towards a safety device. The PTO must be disenga-
ged before engaging reverse gear.
Rev the engine and release the clutch lever slowly
and completely to start working.
Emergency stop / Safety device. Switch A is
always in the depressed position while the tractor
is running, as shown. If any emergency situation
occurs, simply release switch A and the tractor will
stop immediately.
Under difficult circumstances, if you release the engine stop lever, the machine will stop immediately. It
is not possible to press clutch lever B without pulling clutch lever C. When you release clutch lever C, the
machine will run; When clutch lever B is released, the machine remains in neutral in this condition.
3. MAINTENANCE
ATTENTION!
• Turn off the engine before performing any maintenance.
• To prevent accidental starting of the engine, turn the engine switch to the OFF position and
disconnect the spark plug.
• The engine must be repaired by the authorized dealer, unless the user has proper tools, repair
materials and professional ability.
• Use our series of branded engine parts and their replacement. The motor can be damaged by
using a bad replacement.
Lubrication
Proper maintenance and lubrication will help keep the machine in perfect operating condition. The
machine may come from the factory with lubricant, however check the oil levels before starting work.
23