Kärcher B 50 W Manual De Instrucciones página 16

Device description
Overview of the device
Illustration A
Detergent canister (DOSE variant only)
1
Detergent suction hose (DOSE variant only)
2
Fresh water tank filling hole with cap and integrated
3
measuring cup
Turbine screen
4
Hose holder
5
Fresh water filling hose
6
Tank ventilation flap
7
Waste water tank flushing system water connection
8
Float
9
Coarse dirt filter
10
Homebase retaining rail
11
Battery
12
Mop holder
13
R cleaning head
14
Water distribution strip
15
Water dosage regulating knob (Good variant only)
16
Storage area for "Homebase Box" cleaning set
17
Waste water tank cap
18
Holder for smartphone
19
Control panel
20
Waste water tank
21
*Fresh water filling system
22
Filling level indicator and fresh water drain hose
23
Recessed grip for pivoting up the waste water tank
24
Brush replacement button (R cleaning head)
25
Coarse dirt container (R cleaning head)
26
Fresh water tank
27
Type plate
28
Suction bar clamping lever
29
Suction bar
30
Suction bar lowering lever
31
Pedal for raising/lowering the cleaning head
32
Storage compartment
33
Suction hose
34
Fresh water tank cap with filter
35
Cable hook for mains cable
36
Waste water drain hose with dosing unit
37
Push handle
38
Driving lever
39
Roller brush (R cleaning head)
40
Brush replacement pedal (D cleaning head)
41
Disc brush (D cleaning head)
42
D 51 cleaning head
43
Brush tilt rotary knob (D 51 cleaning head)
44
USB port
45
Storage for suction bar
46
D 60 cleaning head
47
Brush head attachment
48
O 51 cleaning head
49
Pad drive board and pad
50
Handle
51
* optional, ** Not in scope of delivery
Colour coding
Device components intended for operation or mainte-
nance by the user are highlighted in yellow.
16
Control panel
Illustration B
Program switch
1
Driving lever
2
* Water dosage button
3
Display
4
Storage space for smartphone
5
Holder for smartphone
6
Speed button
7
* Detergent dosing button
8
"+" button
9
"-" button
10
Intelligent Key
11
White - Operator
Red - Service technician
* Option
Program switch
Illustration C
0
1
The device is switched off.
ECO MODE
2
Wet clean the floor and vacuum up the waste water
with reduced use of resources (reduced brush speed,
suction power, detergent and water dosage).
NORMAL MODE
3
Wet clean the floor and vacuum up the waste water.
INTENSIVE MODE
4
Wet clean the floor (with increased detergent and
water dosage) and vacuum up the waste water.
Suction bar holder
The suction bar can be dismantled and hooked onto the
edge of the device for driving through narrow spaces or
for storage,.
Illustration D
Storage for suction bar (edge of device)
1
Suction bar
2
Symbols on the device
Mains cable for charger
Lashing point
* Mop holder
* Fill with fresh water
Fresh water tank filling level 25%
Fresh water tank filling level 50%
Fresh water tank filling level 100%
Brush replacement pedal (BD)
Brush replacement button (BR)
Adjust brush tilt (D 51 cleaning head only)
Drain for waste water
Drain for fresh water
Remove the coarse dirt container
English
Raise/lower the cleaning head
Drive forwards
Drive in reverse
Intelligent Key
The Intelligent Key is used to switch on the device and
for enabling certain device functions.
● Yellow: Operator
The device can be used. All settings for the cleaning
programs enabled for this key via the smartphone
app may be changed.
● Grey: Foreman
The device can be used. All settings for the cleaning
programs available for the device may be changed.
Installation
Unloading the device
1. Unscrew the screws on the transport locks.
Illustration E
Illustration F
Transport lock
1
2. Remove the transport locks.
3. Push the device forwards from the pallet.
Installing the suction bar
1. Pivot both clamping levers upwards.
Illustration G
Suction hose
1
Suction bar suspension
2
Suction bar
3
Clamping lever
4
2. Insert the suction bar in the suction bar mount.
3. Pivot both clamping levers downwards.
Installing the brushes
1. Only with BD variant: Install the disc brush before in-
itial startup (see chapter Maintenance work).
Note
With variant BR, the brushes are installed.
2. Install the brush (see chapter Maintenance work).
Batteries
Recommended batteries
ATTENTION
Risk of damage
Batteries may only be replaced with batteries of the
same technology.
Lead batteries must not be replaced by Li-Ion batteries
Li-ion batteries must not be replaced by lead batteries.
Lead batteries:
Description
Set 76 Ah - maintenance-free, 24 V
Set 105 Ah - maintenance-free, 24 V 2.815-100.0
Set 115Ah - maintenance-free, 24 V 2.815-091.0
Set 80 Ah - maintenance-free, 24 V
The device requires 2 batteries.
Li-ion batteries:
Description
80 Ah, 25.6 V
The device requires 1 battery.
Replacement battery typ; Inventus (25.6 v 80Ah lithium).
Maximum battery dimensions
Length 350
Width 355
Height 290
Order no.
2.815-099.0
2.815-090.0
Order no.
6.654-454.0