Stop the engine and disengage drive to attachment
before refueling;
before removing the grass catcher;
before making height adjustment unless adjustment
can be made from the operator's position.
Reduce the throttle setting during engine run-out and, if
the engine is provided with a shut-oft valve, turn the fuel
off at the conclusion of mowing.
IV. Maintenance
and Storage
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
To reduce the fire hazard, keep the engine, silencer, bat-
tery compartment
and petrol storage area free of grass,
leaves, or excessive grease.
Check the grass catcher
frequently
for wear or dete-
rioration.
•
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed machines, take care as rotating one blade
can cause other blades to rotate.
•
When machine is to be parked, stored or left unattended,
lower the cutting means unless a positive mechanical lock
is used.
WARNING: Always disconnect spark plug wire and
place wire where it cannot contact spark plug in
order to prevent accidental
starting when setting
up, transporting,
adjusting or making repairs.
4