Ambu aView 2 Advance Instrucciones De Uso página 22

6.3. Starting and stopping a procedure
6.3.1. Starting a procedure
When an Ambu visualization device is connected to the displaying unit, a new procedure
starts when one of the following actions is performed: 1) a patient is selected from Worklist,
2) a photo or video is captured, or 3) the stopwatch is activated.
If a visualization device is connected, the live image is available soon after the displaying unit
is turned ON. Even if a network error or other problems in the system occur, the Live view will
still be available making it possible to use the displaying unit for clinical purposes.
6.3.2. Stopping a procedure
Disconnect the Ambu
visualization device from the
displaying unit and select one
of the following options:
• Press Finish and export 5
to end the current procedure
and export the recorded files
(see section 7.2.).
• Press X 6 to end
the procedure without
exporting files.
• Reconnect the visualization device (or a replacement visualization device) to return to the
current procedure and continue the procedure.
6.4. Procedure workflow using the Worklist
The displaying unit can retrieve patient information from a Worklist server. When a patient is
selected in the Worklist drop-down menu, the selected patient's information will be saved
with the images and videos created during the current procedure.
The patient's information can be retrieved before or during the procedure. If the procedure is
ended with no patient selected, the patient's information must be entered manually.
Update Worklist and search for patient:
• Press arrow down 7 to open the patient list on
the Worklist server.
• Press the update icon 8 to retrieve current patient
information from the Worklist server.
• Press the search field 9 and enter the search term,
e.g. patient name, procedure type, or the HCP's name.
• Press the pin icon 10 to keep the current search term active
while scrolling through the search results.
• The search term will remain pinned until it is unpinned
by pressing the pin icon again.
Select a patient from the Worklist:
• Press the patient's name, then press Confirm.
• To select a different patient, press the new patient's name
and press Change.
• To deselect a patient, press the selected patient's name
and press Deselect.
6.5. Overview of Live View functions
When an Ambu visualization device has been connected to the displaying unit, the Live View
functions are available via the Live View tab.
22
5
7
8
9
10
6