Descargar Imprimir esta página

BATEC HIBRID 2 Manual De Usuario página 48

Ocultar thumbs Ver también para HIBRID 2:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
hen taking the HANDBIKE BATEC HIBRID on any means of transport (car, bus,
train, plane, etc.),
turn the battery key to OPEN, remove the key and then remove the battery.
hen lifting the HANDBIKE BATEC HIBRID, e recommend removing the eight
as indicated in section 3.10 and the battery as per section 4.9.1.
When transporting the HANDBIKE BATEC HIBRID in the boot of a vehicle, we
recommend leaving it attached to a heelchair henever possible.
The BATEC HANDBIKE is not designed to be used as a means of transport inside
a vehicle.
The HANDBIKE BATEC HIBRID ELECTRIC should be stored in a cool, dry place,
protected from direct sunlight and rain. It should not be kept out of use for more
than t o months.
4.4. ATTACHING THE HANDBIKE BATEC HIBRID
Step 1: Get in front of the HANDBIKE BATEC HIBRID, ith the handlebar centred
in front of the wheelchair, with the brake on. ( ee fig. 11, 12)
Step 2: Grab the HANDBIKE BATEC HIBRID by the handlebar and pull it to ards
you, rolling the frame stand until the detaching ramp on the anchoring bar
touches the front axle of the bar on the heelchair. ( ee fig. 13)
Step 3: Tip the handlebar, lifting the front
BATEC HIBRID to ards you.
axle of the bar on the
wheel back on the ground. ( ee fig. 14, 15)
Step 4: Take o the brake on the
BIKE BATEC HIBRID handlebar to make sure the front axle is securely in place.
Step 5: Push the handle until it clicks, so that both the heels on the HANDBIKE
BATEC HIBRID stand frame and the front heels on the heelchair are o the
ground. Your HANDBIKE BATEC HIBRID is no attached. ( ee fig. 16)
4.5. DETACHING THE HANDBIKE BATEC HIBRID
Step 1: Make sure your HANDBIKE BATEC HIBRID is s itched o . ( ee fig. 17)
Step 2: Push the anchor lever for ard ith the palm of your hand until you feel it
come free. Don t let go of the lever and set the HANDBIKE BATEC HIBRID on the
ground. Advice: lean your torso back to take eight o the lever. This ill make
it much easier to detach the HANDBIKE BATEC HIBRID. ( ee fig. 18)
Step 3: Tilt the handlebar, lifting the front heel, hile you push the HANDBIKE
BATEC HIBRID a ay from you. ( ee fig. 19)
e recommend removing the battery before your journey:
hen the detaching ramp has passed the front
heelchair, let go of the handlebar and put the front
heelchair and push gently on the HAND-
– 13 –
heel,
hile pulling the HANDBIKE

Publicidad

loading

Productos relacionados para BATEC HIBRID 2

Este manual también es adecuado para:

Hibrid 2 tetraQuad hibrid 2