Publicidad
Idiomas disponibles
Idiomas disponibles
– Press R button to increment the flashing digit by 1 or convert units.
– Press M button to confirm the digit setting and jump to next digit or next
setting screen to be set.
– The c (circumference number) values are those:
HANDBIKE BATEC HIBRID HIBRID 2: 1602
– Press M for 2 seconds at any setting screen to finish the setting and go to
INFORMATION SCREEN
5. On SETTING SCREEN 1 (step 4) pressing M and R buttons simultaneously for 2
seconds ill display the SETTING SCREEN 2. ( ee fig. 38)
– Battery voltage value is on the bottom and manufacturer fine adjustment
battery value is on top.
6. To return to INFORMATION SCREEN and fix all settings press M button for 2
seconds, if the screen displays SETTING SCREEN 1 press M button for 2 sec-
onds again. ( ee fig. 39)
IMPORTANT!
•
Do not change the battery voltage value and fine adjustment battery value.
•
Don t exit SETTING SCREEN 1 by s itching o the battery.
•
If the battery is fully charged and the screen display shows the following when
s itching on, you must follo steps 3, 5 and 6. ( ee fig. 40)
6. MAINTENANCE AND REPAIRS
Your HANDBIKE BATEC HIBRID has been carefully designed for optimal perfor-
mance, but it is important that you carry out certain preventative maintenance
tasks in line with the use you give your HANDBIKE BATEC HIBRID. This will great-
ly reduce the chance of problems and increase the lifespan of your HANDBIKE
BATEC HIBRID.
Remember that your main source of information and help is the distributor that
delivered your HANDBIKE BATEC HIBRID, who can also respond to any questions
regarding adjustments, maintenance and the arranty.
As you are a member of the BATEC MOBILITY Family , e encourage you to stay
in touch
ith your BATEC HANBDIKE representative in order to make the most
of the product.
– 25 –
Publicidad
