All BATEC MOBILITY batteries use safety systems, including the smart battery
management system (BMS), hich monitors the battery at all times.
In addition to all of the built-in safety systems, to minimise the danger if a prob-
lem ere to arise ith elements outside the battery, such as improper function-
ing of the electrical installations or problems
strongly recommend you follo these instructions carefully:
CAREFUL!
•
Only charge the battery under supervision.
•
Don t charge the battery hile using your BATEC ELECTRIC HANDBIKE: Danger
of electrocution and accidents.
•
Don t charge the battery hile asleep at night.
•
Charge the battery ell a ay from any flammable objects.
•
Never use the discharging port to charge the battery and vice versa, never use
the charging port to discharge it.
•
Only use the BATEC MOBILITY charger provided
HIBRID to charge the battery.
•
Never charge the battery near a heat source.
•
Never charge the battery in temperatures belo 0 C.
•
Always store the battery fully charged.
•
Don t allo the inside of the battery to be manipulated in any ay, as there is a
risk of explosion and/or fire.
4.8.3. ADDITIONAL INFORMATION ON THE BATTERY
Using the battery in cold conditions
The performance of lithium batteries is limited, both in terms of po er and bat-
tery life, in lo
temperatures (belo
bothersome, so
stances. Never charge the battery in temperatures belo 0 C.
Using the battery in damp conditions
The casing of the BATEC MOBILITY battery provides good protection against rain
and dampness for the cells and circuits inside. This protection is enough for the
battery to ithstand these conditions occasionally but regular, prolonged expo-
sure to damp and rainy conditions may cause the battery to stop orking prop-
e recommend storing the battery inside under these circum-
ith the general po er grid,
ith your HANDBIKE BATEC
0 C). It isn t a dangerous situation but it is
– 20 –
e