Publicidad
Idiomas disponibles
Idiomas disponibles
05 - MOUNTING
1 - Secure the product base to the desired installation
location (e.g. wall) using two screws, as shown in the
image below:
NOTES: We recommend 3.5mm x
30mm screws (diameter x length)
and 5mm bushings.
3 - After completing the passage of the wires, fit the
product to the base. First at the top and then at the bot-
tom. Then secure the parts through a screw, located at
the bottom, as shown in the following image:
2 - There is a hole in the rubber gasket for the installation
wires. However, if this hole is insufficient for installation,
enlarge it with a knife, as shown in the image below:
NOTES: Cut only what is necessary for the passage of
the wires.
4 - After mounting the product on the wall, fit the pro-
tective rim on the front of it until a CLICK is heard, thus
ensuring its perfect fit.
ENGLISH
Click!
Click!
71
Publicidad
