Publicidad
Idiomas disponibles
Idiomas disponibles
addition to an audible signal (1 beep).
If validation is denied, the screen will display the reason for the denial and the red light on the LED will illuminate,
followed by 2 audible tones (2 beeps).
12.2 - FINGERPRINT
Fingerprint processing is initiated when the user places his or her finger in the optical sensor housing.
For proper image capture, the user should be instructed not to remove the finger until the beep is heard. It is also
important that the finger does not contain any greasy residue or excess moisture, which will cause blurring in the
captured image and increase the chance of rejection. Gloves and accessories that obstruct the reading of the natural
relief of the finger should also not be used.
Making use of the finger guide assists in enrollment and validation, whenever the user fills in the useful space on the
sensor lens.
After reading the screen, it will display the success message, not found, or a description of the reason for any access
restriction, which may be due to out-of-hours, a group, or not enabled on this device.
12.3 - RFID
RFID validation is performed by approximating the TAG, CARD or RFID device of the WeGo Bio Pro integrated reader
in the area near the optical sensor. Only Mifare cards that are compatible with Nice products may be used. Upon
reading, an audible signal is emitted, followed by validation and a light signal through the LED indicating the access
attempt. The description of the verification result will also appear on the screen.
Other readers can also be used via the existing Wiegand input in the WeGo Converter, which can be configured in the
receive format menu in quantities of 26, 34 or 66 bits.
13 - MENU
Use the lower arrows to navigate between the options and submenus. The right arrow returns to the main screen.
76
ENGLISH
Publicidad
