Publicidad
Idiomas disponibles
Idiomas disponibles
Insert the flash drive into the USB-HOST port of the equipment and press "SEARCH". The message must indicate
that the presence of the recorder has been detected, and only then will the "PERFORM BACKUP" button be enabled.
After execution, the error message or a SUCCESS screen is displayed.
19 - DATE AND TIME
The "DATE AND TIME" button allows you to set the internal clock of the unit, in addition to format settings and auto-
matic adjustment when the unit is connected to an Ethernet network with Internet access.
Always press "CONFIRM" before changing the screen if any adjustment has been made, otherwise the change of the
internal clock will not take effect.
19.1 - AUTOMATIC ADJUSTMENT
Automatic adjustment can be enabled if the equipment is connected via an Ethernet connection with internet access.
An internal periodic check routine (every 60 seconds) automatically corrects the date and time.
19.2 - TIME FORMAT
Option to display the time from 0 to 23 hours or from 0 to 12 am/pm on the home screen and screensaver.
83
ENGLISH
Publicidad
