Publicidad
Idiomas disponibles
Idiomas disponibles
14.5 - PASSWORD
The registered password must be between 4 and 6 numeric characters. Leading zeros can be used, which are con-
sidered for validation. Always use the OK key to confirm the entered password.
For example, the passwords "0001", "00001", and "000001" are valid because they contain 4, 5, and 6 digits and are
considered different. It is advisable to always use the 6 digits, without patterns of sequential or repeated numbers,
observing the validation depends on the ID of up to 12 digits and the password of up to 6 digits, which reduces the
possibility of fraud.
14.6 - RFID
RFID (radio frequency to identify) refers to the card, key fob or TAG that operates at 13.96 MHz (Mifare) with NICE
formatting. The enrollment can be done by bringing the card closer to the reading integrated in the biometrics itself,
the same region as the biometric sensor. After reading, confirm by pressing OK on the keyboard.
The RFID enrollment can be done by typing the printed serial directly, in this case, press "TYPE" and a hex-numeric
keyboard will be shown. Two formats can be used to type:
- Wiegand 26 bits, which consists of entering up to 3 digits from 0 to 255, then a comma "," and up to 5 more digits
from 0 to 65535;
- Wiegand 34 bits, where up to 8 digits can be entered, in this specific case including hexadecimal characters (from
A to F).
78
ENGLISH
Publicidad
