Coway APMS-1020A Manual Del Usuario página 12

INDICATORS AND BUTTONS
Indicators
1 Mode indicator 2
Mode indicator
1
Each time the mode button is pressed,
the purifier cycles through AUTO →
CALM → MAX, and the indicator for the
final selected mode is illuminated.
Multi-purification indicator
3
This indicator is illuminated when multi-
purification is on.
Illumination sensor
5
This sensor detects ambient light at night to convert to calm mode.
* This feature is possible in auto mode, but in manual mode, it does not convert.
Current humidity/status indicator
6
When the current humidity button is pressed, the purifier displays the ambient humidity where the purifier is
installed. The current humidity level is displayed in numbers on the front for 3 seconds, and then the fine dust
level is displayed. The humidity level is displayed in increments of 5%.
The fine dust level is displayed even if the current humidity button is pressed again.
- Filter drying : The indicator is on while the humidifying filter drying feature is operating.
- Adding/draining water: The indicator is on when water should be added or drained.
- While the buttons are locked, -L- is displayed.
- While the buttons are unlocked, UL is displayed.
11
Air volume indicator 3 Multi-purification
4 Purification/
indicator
humidification indicator
2
4
5
Current humidity/status
6
indicator
Air volume indicator
This indicator is illuminated when level
1/2/3 air volume is on.
Purification/humidification indicator
This indicator is illuminated when
purification/humidification is on.
Illumination sensor