Coway APMS-1020A Manual Del Usuario página 4

SAFETY INFORMATION
Please follow the instructions as they are for your safety.
Please read this information to ensure your safety and prevent property damage.
Please read the cautions carefully and use the product correctly.
DANGER : FAILING TO FOLLOW THE PRECAUTIONS BELOW MAY RESULT
IN SERIOUS INJURY OR EVEN DEATH.
Do not use damaged power plugs or loose sockets.
The power plug must be plugged into only 220 V – 240 V~ 50 Hz, 60 Hz sockets.
Do not pull on the power cord to move the device.
Do not touch the power plug with wet hands.
To avoid damaging or warping the power cord, do not use excessive force to
bend the power cord or put heavy objects on top of it.
Do not repeatedly connect and disconnect the power plug.
If water enters the power supply, unplug the power and completely dry before
using again.
Be sure to unplug the power during product repair, maintenance, or part
replacement.
If the power plug pins or contact area are covered in dust or water, the power
will be blocked. Wipe them clean and then dry before use.
Do not plug several electric appliances into one socket, and use only a dedicated
socket.
Unplug the power when not used for a long time.
Do not carelessly connect or tamper with the power cord.
If the power cord is damaged, do not replace it yourself. Contact a service
center to have it replaced.
Do not install near electric heaters.
Do not put on top of electric products like heaters or televisions.
Do not install in places with a lot of humidity or dust or places where water
(rainwater) splashes.
03