Publicidad
» Fig�6
» Fig�7
1. Nut + washer
2. Washer + nut + lock nut
» Fig�8
36
ACQVARIA
» Fig�9 AQ 10-20-30-35
» Fig�10
Front panel/standard grille assembly
The front panel/grille, available in RAL9003 and RAL9010 ver-
sions, is delivered in a separate cardboard box:
Ū AQYGR30 for models AQ 10-20-30-35
Ū AQYGR60 for models AQ 40-50-60
Before installing the front panel: (Fig.11 )
Ū Remove the screws (1) securing the retainers (2) on each side
(remember to put these screws back in place after installa-
tion).
Ū To open the grille (3), move the two retainers (2) in the direc-
tion of the arrow.
Ū Open the grille (3) by 45°.
Ū Detach the control panel's safety cable (4) (remember to at-
tach it again after installation).
Ū Lift the grille to remove it from the control panel.
» Fig�11
To install the front panel: (Fig.12 )
Ū Turn the two locking clips (5) downwards.
Ū Attach the control panel of the panel (6) to the unit by means
of the two hooks (7), matching them to the locking clips (5).
Ū Check the exact position of the panel's control panel in
Publicidad
