Publicidad
relation to the suspended ceiling. Adjust the position of the
indoor unit as necessary.
Ū Attach the panel's control panel to the unit using the special
screws and washers (8) provided.
Ū Put the grille (3) in place, making sure that the filter (9) is cor-
rectly positioned.
Ū Hook the safety cable to the control panel, close the grille,
and put the screws securing the retainers (2) back in place.
» Fig�12
Front panel/grille Effetto assembly
The front panel/grille, available for AQ 10-20-30-35 versions, is
delivered in a separate cardboard box:
Ū AQYD30 for models AQ 10-20-30-35
To install the panel (Fig.13 ):
Ū Turn the two locking clips (1) downwards.
Ū Attach the panel body (3) with appropriate screws (4) at the
inserts (2) already present on it.
Ū Place the filter (5) resting on the cassette unit and block it
fixing the supplied brackets (6) with relatives screws (7).
Ū Place the covering panel (9) hooking up safety cables first (8)
to the clip (1) and then join the panel with unit (3) through
magnet.
» Fig�13
37
WC66000482-06
Publicidad
