Waterco MultiCyclone 12 Manual De Instalación Y Funcionamiento página 15

GENERAL MAINTENANCE GUIDE
To ensure the maximum life of the MultiCyclone, please follow the procedures below:
1. Visually monitor through the MultiCyclone clear sediment chamber. Clean sediment chamber
when accumulated sediment is half full.
2. Maintain a correct chemical balance of your pool/spa water. The chemical balance of water
is a relationship between its pH, total alkalinity, calcium hardness and water temperature. The
water must be maintained at all times to the following:
PH LEVEL
TOTAL ALKALINITY
CALCIUM HARDNESS
Also, within these tolerances be balanced to the Langelier Saturation Index within a range of
-0.2 to +0.2.
Note: Testing kits are available to test the water yourself or alternately bring a sample of the
water to a professional pool and spa shop.
3. Mains water and rural water supplies need to be monitored. Saturation (life) in mains water or
bore (rural) will vary depending on water quality.
4. To prevent damage to the pump and filter and for proper operation of the system, clean
pump strainer and skimmer baskets regularly.
5. Replace the pressure gauge if faulty readings are observed.
: BETWEEN 7.2 & 7.8.
: BETWEEN 80 & 150ppm.
: BETWEEN 150 & 300ppm.
MultiCyclone
*NOTE: This position is
not available on 4-Way
Multiport Valves.
I pg 11