Waterco MultiCyclone 12 Manual De Instalación Y Funcionamiento página 6

English
MULTICYCLONE
MultiCyclone is a brilliant prefiltration device that can save
water and minimises pool filter maintenance. Based on the
principals of centrifugal water filtration, MultiCyclone filters
up to 80% of the pool's dirt load before it reaches the pool
filter and only requires 15 litres (4 gallons) of water to clean.
• Minimises filter maintenance and saves water.
• No filter media to clean or replace.
• Multiple hydrocyclones.
• Suitable for new and existing installations.
Centrifugal Water Filtration
Incoming water tangentially enters its multiple hydrocyclones, generating a strong centrifugal
effect. Approximately 80% of the incoming dirt load is spiralled down to its clear sediment
chamber. The outgoing water is piped to the finally polished via the pools filtration system.
Simple maintenance
The MultiCyclone sediment chamber is easily cleaned by opening its purge valve. Only 15 litres
(4 gallons) of water is discharged.
Minimise Media Filter Backwash Frequency
The installation of a MultiCyclone as a pre-filter to a sand filter can reduce its backwash frequency
to once per year, resulting in a saving of up to 7000 litres (1850 gallons) of water per year for an
average domestic sized swimming pool.
Minimise Filter Cartridge Cleaning and Replacement
The installation of a MultiCyclone as a pre-filter to a cartridge filter can reduce filter cartridge
cleaning and replacement to once per swimming season and even up to once per year, depending
on the size of the cartridge filter.