Balluff BMP 02-P A-P Serie Manual De Instrucciones página 35

BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
1
About this guide
1.1 Validity
This guide provides all the information necessary for safe
use of the BMP Magnetic Field Positioning System with
analog voltage and IO-Link interface.
It applies to the following models (see Type code on
page 27):
– BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P_ _
– BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P_ _ -S4
– BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P_ _ -S75
This guide is intended for qualified technical personnel.
Read this guide before installing and operating the BMP.
Original User's guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2024, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3 Symbols and conventions
Individual actions are indicated by a preceding triangle.
► Instruction
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Digits without further identification are decimal numbers
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
www.balluff.com
1.4 Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
1.5 Technical terms and abbreviations used
IODD IO-Device-Description
PD Process data
MDC Measurement Data Channel
SSC Switching Signal Channel
english 5