Balluff BMP 02-P A-P Serie Manual De Instrucciones página 51

BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
8
IO-Link interface
The BMP has an IO-Link communication interface that
allows direct access to sensor values and parameters.
For more information, see the configuration guide
at www.balluff.com on the product page.
Notes:
– An IO-Link master is required for
communication via the IO-Link interface.
– The description files (IO-Link Device
Description – IODD) required for configuration
as well as further information on IO-Link can
be found at www.balluff.com.
– Without an IO-Link master, IO-Link sensors
operate in SIO mode (Standard Input/Output)
and behave like sensors with conventional
output. The parameter settings are also
effective in SIO mode.
8.1 Primary Functions
– Identification
– Device Discovery
– Switching Profiles
– Measurement Profiles
– Touch Sensitive Control
– Frontend Settings
8.2 Secondary Functions
– External Signal Blanking
– Signal Delay
– Signal Speed Monitor
– Switching Counter
– Basic Statistics
– Logic Blocks
– Operating Hours Counter
– Boot Cycle Counter
– Voltage and Current Monitoring
– Extreme Environment Status
– Internal Temperature
– Storage Usage Monitoring
www.balluff.com
8.3 System Functions
– Device Status and Detailed Device Status
– Diagnosis Suppression
– Reset Commands
– Variant Configuration
– Pin Assignment
– LED Meaning and Configuration
– Process Data Info and Configuration
– Profile Characteristic
– Device Access Locks
– Parameter Manager
english 21