Balluff BMP 02-P A-P Serie Manual De Instrucciones página 42

BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
5
Installation and connection (continued)
5.1 Mounting on a pneumatic cylinder with
C-slot (BMP 02-...-07-P...)
1. Align the sliding block on the BMP so that the sensor
can be guided into the C-slot of the cylinder.
2. Guide BMP into the C-slot.
Slot nut
Fig. 5-1: Guide BMP into the C-slot
3. Position the BMP and tighten the hexagon socket
screw of the sliding block.
Fig. 5-2: Position BMP and tighten hexagon socket screw
4. Check BMP for tight fit and retighten hexagon socket
screw if necessary.
5. Provide strain relief (see chapter 5.10 on page 17).
12 english
BMP
Cylinder
1 Nm (hexagon socket
wrench 1.5 mm)
5.2 Mounting on a pneumatic cylinder with
T-slot (BMP 02-...-06-P...)
1. Align the sliding block on the BMP so that the sensor
can be guided into the T-slot of the cylinder.
2. Guide BMP into the T-slot.
Slot nut
Fig. 5-3: Guide BMP into the T-slot
3. Position the BMP and tighten the hexagon socket
screw of the sliding block.
Fig. 5-4: Position BMP and tighten hexagon socket screw
4. Check BMP for tight fit and retighten hexagon socket
screw if necessary.
5. Provide strain relief (see chapter 5.10 on page 17).
BMP
Cylinder
1 Nm (hexagon socket
wrench 1.5 mm)