Etac R82 Multi Frame Manual Del Usuario página 38

General
We appreciate your choice of a new product from R82 - a worldwide supplier of technical aids and ap-
pliances for children and teenagers with special needs. To fully benefit from the options offered by this
product please read this user manual before use and save it for future reference.
Intended purpose
The device is a frame for seating systems for
children and adults with disabilities.
Indications
The device is used together with a seating
system (i.e. a modular seating system like R82
x:panda or R82 Panda Futura). It can be used
by children and adults with disabilities, who
lack the ability to maintain a seated position
and move around (Within the room or between
rooms / outdoors) without an assistive device.
The target group for the device is based on
functional ability and anthropometry. It is not
based on a specific health condition or age.
The user is the person sitting in the seat used
with the frame. The caregiver is the person
operating the frame. Never leave the user
unattended in this product. Ensure permanent
supervision by a caregiver. The use of the
device will be discontinued more times during
the day where the user will be lying down,
standing or sitting in another assistive device
or a conventional product.
For transportation the device is suitable
for children and adults in the weight range
of 22 kg to specified max user weight for
transportation.
Contra indications
There are no known contra indications
Precautions
There are no known precautions
Application areas
The product is for indoor and outdoor use
Enclosed tools:
• 4, 5 and 6 mm Allen key
• 10 and 13 mm spanner
Declaration of Conformity
This product conforms to the requirements of
the Medical Devices Regulation (2017/745).
The CE mark must be removed when:
• Rebuilding the product
• Using the product outside the intended
purpose and declaration of conformity
• Using other than original R82 spare parts
and fittings
When combining the device with other
products, the combination must not change
the intended purpose of the products or
EN
ENGLISH
modify the products in such a way that
compliance with the applicable requirements
may be affected. The person / company
responsible for the combination of the
products must ensure that the applicable
requirements are fulfilled.
Applicable requirements examples:
• Alignment of user weight/mass of the
combined seat and base, approval for
transportation in vehicles of both products
(ISO16840-4 for seat and ISO7176-19 for
base)
• Material safety (biocompatibility,
flammability), mechanical safety (stability,
squeezing hazards, inter connection),
electrical safety
Disposal
When a product reaches the end of its lifetime,
it should be separated by material type so
that the parts can be recycled or disposed
of properly. If required, please contact your
local dealer for a precise description of each
material. Please contact your local authorities
to be informed of the options available for
recycling in an environmentally-friendly way.
Accessories and spare parts
The products from R82 can be supplied with
a variety of accessories including vests and
belts which comply with the needs of the
individual user. Spare parts can be ordered on
request. Find the specific accessories on our
website or contact your local dealer for further
information.
R82 Warranty
www.etac.com/support
Presales information and
instructions
Presales information and instructions are
available at www.etac.com, under your
product, in the documents section.
38
etac.com