Descargar Imprimir esta página

hamach HR 2000 Instrucciones De Uso página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
1
Introduction
This manual describes how to install the HR 2000, its use and the basic cleaning and periodic maintenance operations.
The HR 2000 is an innovative and pneumatically operated manual washing installation for the cleaning of spray
guns.
The HR 2000 is completely made out of stainless steel and has an air distributor to clean and dry parts and an
vapour extraction system.
This manual is an integral part of the HR 2000 and must be correctly kept to allow its integrity and its
reference during the whole lifetime of the HR 2000.
Before using the equipment, attentively read the expressions written after the word
The regular running of the HR 2000 depends on the respect and the observance of the instructions in this manual. It
is obligatory to follow the instructions in this manual.
The instructions in this manual are binding:
E.M.M. International BV does not accept any responsibility either for negligence or for not observing
the instructions in this manual.
The HR 2000 Spray gun washer has been built according to the regulations of 89/392/CEE,
91/368/CEE, 93/44/CEE and 93/68/CEE and CE (Ex) II 3 G c IIBT4.
This washer also complies with the demands of UNI EN 292-1:1992 and UNI EN 292-2:1992 and complies with ATEX
regulations. The Machine safety and risk assessment have been determined according to
EN 983:1997 and EN 1050:1996.
The complete documents concerning these regulations are described in the technical documentation. These are
available at the constructer of the machine.
Warning! Only general maintenance is to be carried out by the user (see chapter 7).
1.1
Guarantee
Before starting up, check if packaging is in good condition and if all spare parts are complete and
undamaged.
Claims must be submitted within 2 days of purchase and only if the buyer has complied with the following
conditions of guarantee:
E.M.M. International BV herewith declares that the product is guaranteed under the following
conditions:
a) The spray gun cleaner is guaranteed for a period of 12 months from date of purchase if the
warranty form has been returned to E.M.M. International BV immediately after purchase.
b) The guarantee includes free replacement or repair of spare parts with productions faults.
c) The equipment must be forwarded carriage free in original packing to EMM International in Zwolle and will
be returned at costs of customer. If the service is required by a technician on location, the time spent
traveling and servicing will be charged to the customer. Time deeded for repairs and costs of parts will not
be charged.
d) The supplier will not be held responsible for direct or indirect damage caused by failing to follow the
instructions specified in this manual – with regard to installation, operation and maintenance.
The guarantee does not cover compensation of direct or indirect damage caused as a result of temporary
failure/interruption. If the item is shown to have an inherent defect present at the time of sale, you will get
a replacement.
The guarantee is valid only when the terms of payment have been met.
The guarantee expires when (in addition to the situations mentioned in the contract):
The machine has been misused;
Damage occurs as a result of insufficient maintenance;
The spray gun cleaner has been tampered with or repaired without EMM International' consent or wrong
spare parts have been fitted resulting in damage;
The customer fails to follow the instructions specified in this manual;
A corrosive agent has been used.
English
Warning!
15

Publicidad

loading

Productos relacionados para hamach HR 2000

Este manual también es adecuado para:

000473