hamach HR 2000 Instrucciones De Uso página 21

8 Pneumatic system
9 Trouble shooting
Problem
After the machine has been
connected to compressed air, it
does not deliver liquid to the
distributor.
For alterations in the circuits, contact EMM International in Zwolle, The Netherlands.
A: Air inlet
G2-G3-G4: Valve for manual functions
N1-N2: Venturi pump
O: Cyclone
Possible cause
1. The pressure is not high
enough.
2. The distributor feed valve is
not opened.
Solution
1. Check the air feed system.
2. Open the distributor feed
valve.
21