Publicidad
Idiomas disponibles
Idiomas disponibles
unfinished cleaning task.
Note:
* After Suction Cup releases its grip, if there is no button operation
within one minute, the suction cup will automatically attach to prevent
Station from accidentally tipping over.
Maintenance during Cleaning
5
For heavily stained glass, wash or replace the Wiping Pad multiple
times and clean the four Spherical Sensors in time.
* Clean the Wiping Pad in time and make sure that any small particles
on it are completely removed to avoid scratching the glass.
Finish Cleaning
6
Finish Cleaning When WINBOT is Working
1. Press and hold
for 2 seconds or more, then WINBOT will
immediately halt its current task, return to its Initial Spot, and wait to
be removed.
2. Press and hold the
on WINBOT for 2 seconds or more to stop
the fan. Then, take WINBOT off according to voice prompts.
Finish Cleaning when Cleaning Task is Completed
After finishing the cleaning task, WINBOT will automatically return to
its Initial Spot and wait to be removed.
Press and hold
on WINBOT for 2 seconds or more to stop
the fan. Then, remove WINBOT according to voice prompts.
* When removing WINBOT, firmly grasp its handle to prevent accident
falling.
19 EN
Publicidad
