ECOVACS WINBOT W2 OMMNI Manual De Instrucciones página 26

No. Malfunction
Voice prompt: "WINBOT
5 encountered an
obstruction."
WINBOT cannot be take
6 off as it does not return to
Initial Spot.
Voice prompt: "Avoid
7
window edges."
EN 26
Possible Causes
Components malfunction
Algorithmic error
WINBOT loses track of the Initial
Spot when manual control or mode
switching is initiated immediately after its
attachment.
When cleaning frameless glass,
WINBOT's attachment location is too
close to the window frame.
Solutions
Hold the Compound Cable tightly, pull WINBOT back, long
press Start button for 2 seconds to take WINBOT off. Please
be sure not to stand directly beneath WINBOT to prevent
being hit by its accidental falling. Power off and then restart
WINBOT. If the problem persists, contact the Customer
Service.
Due to algorithmic error, WINBOT may deviate significantly
from its Initial Spot, making it difficult to take WINBOT off.
Control WINBOT via the app to a more accessible location.
Control WINBOT to a more accessible location via the app.
Hold WINBOT's handle, long press Start button for 2
seconds, and take WINBOT off. Reattach WINBOT. The
attachment location should be at least 10 cm away from
window frames.