ECOVACS WINBOT W2 OMMNI Manual De Instrucciones página 21

2. Auto Take up the Compound Cable
After placing WINBOT in the container, press
will immediately start reeling in the Compound Cable .
* As the reeling-in process nears completion, the reeling-in speed
slows until the cable is fully reeled in. This is a normal occurrence.
* During the reeling-in process, the Compound Cable may become
twisted. Do not worry and help straighten it. Then press
complete the reeling-in process.
3. Power Off
, and the Station
Press and hold
WINBOT off.
4. Unfasten the Safety Rope
again to
5. Charge the Station
Place the Station near a power outlet and connect it to the power
source. The charging time is approximately 3 hours at room
temperature.
6. Store the Station
Station should be stored in a dry environment to prevent moisture
affecting the battery and motherboard.
Notes:
1. Charging speed may slow down in low temperatures.
2. WINBOT and its Station are suitable for use in temperatures
ranging from 0° C to 40° C. Do not charge the Station in temperatures
outside this range.
3. WINBOT's fan cannot operate while charging. Please use WINBOT
after charging is completed.
4. If you do not use WINBOT for an extended period, it is
recommended to periodically charge the Station to help maintain its
battery health.
on the Station for 2 seconds and more to power
21 EN