Publicidad
Idiomas disponibles
Idiomas disponibles
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
product, for avoiding danger, for minimising repair costs
and downtimes and for increasing the reliability and ex-
tending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations applica-
ble to the operation of the product in your country.
Keep the operating manual package with the power tool
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that oc-
cur due to a failure to observe this manual and the
safety instructions.
2
Product description (fig. 1)
1.
Handle
2.
On/off switch
3.
Switch lock
4.
On/off switch (laser)
24 | GB
5.
Additional handle
6.
Battery compartment cover
7.
Laser
8.
LED work lamp
9.
Cutting angle scale
10.
Front wing screw
11.
Knurled screw (parallel stop)
12.
Parallel stop mount
13.
Saw blade
14.
Flange
15.
Washer
16.
Allen screw
17.
Protective cover
18.
Base plate
19.
Retracting lever (protective cover)
20.
Fixed protective cover
21.
Sawdust ejection port
22.
Battery mount
23.
Spindle locking
24.
Wing screw
25.
Allen key
26.
Cutting depth scale
27.
Rear wing screw
28.
Scale (parallel stop)
29.
Parallel stop
30.
AAA batteries
31.
Battery*
32.
Release button (battery)
* = not included in the scope of delivery!
3
Scope of delivery (Fig. 1)
Item Quantity Designation
13.
1 x
25.
1 x
29.
1 x
30.
2 x
1 x
1 x
4
Proper use
The cordless hand-held circular saw with switchable la-
ser is suitable for sawing in wood, plastic or light build-
ing materials (e.g. plasterboard). Sawing metal is not
permitted.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the prod-
uct.
www.scheppach.com
Saw blade
Allen key
Parallel stop
AAA batteries
Cordless hand-held circular saw
Operating manual
Publicidad
