Franke CG 981 M M Manual De Instrucciones página 22

Cooling fan
In order to reduce the temperature at the door, control panel and sides, the Franke oven is equipped with a cooling fan
which is automatically activated when the oven is hot. When the fan is on, air blows from the front of the oven between
the front panel and oven door; special attention has paid to ensure that the exiting air does not disturb the kitchen
environment and that noise is kept to a minimum.
To protect kitchen units, the fan stays on after cooking until the oven has cooled down sufficiently.
Programming cooking time
This enables a cooking mode to be programmed with the required times and temperature.
The possibilities are:
- timer: countdown of a fixed time, without effects on start and end of cooking;
- duration: instant start of cooking with set duration;
- cooking end: delayed start of cooking with set duration.
Setting the Timer
The Timer is separate from any other oven function and is used to set a required time after which an acoustic signal
sounds, without affecting the cooking processes.
Switch the oven on, press the knob C once, the icon
Select "TIMER" and confirm by pressing the same knob. Then set the required time in 30-second steps (and one-minute
steps for a time of more than 1 hour) up to a max. of 9 hours and 59 minutes. Confirm by pressing the knob C.
(After 15 seconds the oven confirms in any case, even if the user does not confirm).
The display will now show the message "TIMER" and starts the countdown.
If the time remaining is more than 1 hour it will be shown in hours and minutes (e.g. 1h:03, indicates 1 hour and
3 minutes remaining).
If the time remaining is less than 1 hour it will be shown in minutes and seconds (e.g. 9'14, indicates 9 minutes and
14 seconds remaining).
A acoustic alarm sounds for 1 minute at the end of the set time. It can be muted by pressing any button. At the same
time, the display shows the message "END OF TIMER".
To reset the timer press the knob C and turn it to change the timer duration.
If other programming parameters are set as well as the timer, the display highlights both. In any case the oven will carry
out its countdown with an acoustic signal at the end.
The timer can be activated even after selecting a cooking function from the self cooking menu: the setting modes are the
same as those described above.
Instant start of cooking with set duration
To cook for 30 minutes at 200 °C. With the oven on, select a cooking mode from the "self cooking" menu then select
"duration". Confirm by pressing the knob C.
Then set the required cooking duration (30 minutes in the example) and in any case from a minimum of 1 minute to a
maximum of 9 hours and 59 minutes. After confirming, the display shows the cooking end time. Cooking starts after
confirming again (cooking will start automatically after 15 seconds even without confirming). By turning the knob C
the temperature can now be increased or decreased from a min. of 50 °C to a max. of 270 °C (200 °C in the example) in
steps of 5°.
NOTE: For all the functions, except defrost, grill and turbo grill, after having confirmed the cooking duration, and when
it is at least 15 minutes, the programme asks if the last 5 minutes of cooking are to be used with the grilling function.
This additional function is suitable for browning food.
A - preheating stage
(The set parameters can always be corrected with the same operations)
The display now shows the message "PREHEATING" together with the Cooking Mode Name, e.g. "MULTI POWER",
as well as the set duration and current time.
The thermometer with mercury column rising (
The display starts the countdown only after the required temperature is reached (except in grill functions, where the
countdown begins immediately), when two series of three sounds will be heard.
B - cooking stage
Place food in the oven.
The display now shows the message "DURATION" together with the Cooking Mode Name, e.g. "MULTI POWER",
as well as the current time and the countdown which indicates the residual cooking time.
starts flashing, and the display will show the message "SET TIMER".
) indicates that the oven is becoming hotter.
en
21