Publicidad
Idiomas disponibles
Idiomas disponibles
3. LED indicator
the product is under standby mode and there is no mobile device
on the Qi charging surface
4. Place the mobile device on the Qi charging surface
sure the center of the device is aligned over the center of the
Qi charging surface. Charging will begin on contact. The LED
indicator
2
charging surface
Protective covers that protect the mobile device may interfere
with the charging process. In this case, the mobile device must be
removed from the protective cover.
NOTE: The charging power is up to 10 W, depending on the
*
power adapter used.
LED indicator
The product uses an LED indicator to show the operating status:
LED indicator
Blue lights up two
seconds
Blue lights up
Blue is flashing
Green is flashing
2
will light up blue for approx. two seconds when
lights up blue when charging is active on Qi
1
.
status
2
Status
Starting process (Boot phase) / Standby
Charging / Full Charge
Metal obstruction
Incompatible adapter or cable connected
1
.
. Make
1
GB/IE
33
Publicidad
