Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
encountered
I am unable to light
my barbecue when
using it for the 1
st
time or after having
used it several
times
When using my
barbecue for the
first time or after
having used it
several times, none
of the burners will
light
The barbecue
burners will not
light with the
(piezzo) ignition
button but will light
with a match
Possible causes
Refer to case n°2: Do not perform the replacement tests, but
take off all the burners and clean both these and the injectors
with compressed air (generally available from your dealer).
• Gas cylinder
valve closed, not
sufficiently open or
not drained
• Gas cylinder empty
• Cylinder-barbecue
connection hose
blocked
• Faulty (piezzo)
integrated
electronic
ignition system or
misplaced
16
Proposed solutions
• Open (or open further) the gas
cylinder valve in order to release gas
in the barbecue circuit. If it doesn't
work, you must drain your hose by
pushing the knob situated on the
hose at the level of the gas cylinder.
• Try lighting the barbecue using a new
gas cylinder. If the barbecue lights
with the new cylinder, this means
that your initial cylinder was empty.
• Try lighting the barbecue with
another connection hose. If the
barbecue lights with the new
cylinder, this means that your initial
cylinder was empty. Clean it with
compressed air (generally available
from your dealer).
• Gently move the tip of Piezzo so that
it is located about 3-4mm of the
burner and at a hole of the burner.
If that does not work, it means that
the Piezzo is defective. Contact your
dealer.
EN
Publicidad
