30
BatteryPRO | E-HEALTH Charge 20
Multi language digital user manual
7. Installation instruction
7.1
Before installation
Read all the instructions before using and
n
installing this product
Please check with your local network oper-
n
ator if it is necessary to register the device
as a charger
Do not use this product if power cable or
n
charging cable have any damage
Do not use this product if the enclosure or
n
charging connector are broken or open or
if there is damage
Do not put any tool, material, finger or other
n
body part into the charging connector or
EV connector
The product should be installed
only by a licensed contractor and/
or licensed technician in accor-
dance with all building codes,
electrical codes and safety stan-
dards.
The product should be inspected
by a qualified installer prior to ini-
tial use. Under no circumstances
will compliance with the informa-
tion in this manual relieve user of
his /her responsibilities to comply with all ap-
plicable codes and safety standards.
Power feed must be 3 Phase Wye configu-
n
ration with TN(-S)/TT grounding systems
In the installation of TN(-S) system: the neu-
n
tral (N) and the PE of the power distribution
are directly connected to the earth. The PE
of the charger equipment is directly con-
nected to the PE of power distribution and
separate conductor for PE and neutral (N)
In the installation of TT system: the neutral
n
(N) and the PE of the power distribution are
directly connected to the earth. The PE of
the charger equipment is isolated to the PE
of power distribution to the earth
The capacity of power supply should be
n
higher than 22.0kVA in order to function
correctly
The product should be installed in free air
n
area and keep at least 30cm clearance dis-
tance to all air vent of the product
Need sufficient space for product instal-
n
lation and maintenance, please keep not
less than 60cm clearance distance from all
around the product
Do not move the charge in speed higher
n
then 1Meter/second (about 3.6Km/h nor-
mal walking speed), and do not move at
bumpy surface