Improper cleaning agents might spoiled
coating, painting, surface, brightness and
durability of all exterior parts
If there is water intruding into the DC Fast
n
Charger then please cut off the power
source immediately and contact the DC
Fast Charger provider for repair
Please make sure the charging connector
n
is returned to the holder of the charging
connector after charging to prevent dam-
age
If there is damage to the charging connec-
n
tor, charging cable or holder of the charging
connector then please contact the DC Fast
Charger provider
When using the DC Fast Charger please
n
handle properly. Do not strike or scrape the
cabinet or screen
If the enclosure or screen is broken,
n
cracked, open or shows any other indi-
cation of damage then please contact the
Standalone DC Fast Charger provider
Danger of electrical shock or injury.
Turn OFF power at the panelboard
or load center before working on
the equipment or removing any
component. Do not remove circuit
protective devices or any other
component until the power is
turned OFF.
Disconnect electrical power to the DC Fast
n
Charger before any maintenance work
to ensure it is separated from the supply
of AC mains. Failure to do so may cause
physical injury or damage to the electrical
system and charging unit
Note:
Before switching off main breaker to be-
n
gin maintenance, please record the status
code number on the LCD monitor
Maintenance of the DC Fast Charger shall
n
be conducted only by a qualified technician
After opening the front door of the DC Fast
n
Charger, turn off the main breaker and aux-
iliary breaker before any maintenance work
Replace the ventilation filter every six to
n
twelve months
Check the connection of inner cables
n
monthly
Please provide the EVSE information in-
n
99