EN
7 DESCRIPTION OF COMPONENTS
47-PRO E VARIO
1
Motor stop safety control bar
2
Vario actuation
3
Drive control bar
4
Bowden cable detachment (for each Bowden cable)
5
Belt drive covers
6
Battery cover
7
Battery/batteries (under the battery cover)
8
Adjusting handle for cutting height adjustment
9
Front carrying handle
10 Air outlet
11 Air filter
12 Rear carrying handle
13 Insulation shell (on both sides)
14 Ejection flap
15 Collecting bag
16 Motor start release button (red)
54-PRO E VARIO
1
Motor stop safety control bar
2
Vario actuation
3
Drive control bar
4
Bowden cable detachment (for each Bowden cable)
5
Belt drive covers
6
Battery cover
7
Battery/batteries (under the battery cover)
8
Adjusting handle for cutting height adjustment
9
Front carrying handle
10 Air outlet
11 Air filter
12 Ejection flap
13 Collecting bag
14 Insulation shell (on both sides)
15 Motor start release button (red)
All models
8 PREPARATION
The following parts are included in the packaging for assembly of the mower:
•
Mower with preassembled guide bar
•
Collector sheet, grass collector frame
•
Tool bag with the following contents:
–
Operating instructions with declaration of conformity
–
Warranty conditions (depending on model)
–
Various fixing parts.
In the unlikely event of a missing part, please contact your dealer.
47-PRO E VARIO
Raise the guide bar (figure A1 + B1 + E1)
Open out the Z-shaped, folded guide bar by pulling upwards in the following order:
–
First, lift up the lower guide bar section (1) A1, push the lower part ends so far
apart that the locking cams (2) pointing inwards on both sides lock into the
corresponding bores B1.
Three different handlebar heights can be set.
Note
When folding the lower guide bar section, ensure that the Bowden
cables do not become twisted.
–
To fasten, slide one concave disk (4) and one spacer bushing (5) onto each
of the upper bolts (3) and screw into place with a hexagonal nut (6) B1 (from
the tool bag).
–
Now raise the upper guide bar section (7). When the upper section and lower
section are on the same level, tighten the knurled nuts (8) firmly by hand E1.
9