Sabo 47-PRO E VARIO Manual Del Operador página 59

EN
Sound pressure level
47-PRO E VARIO
Emission sound pressure level at operator's workplace;
measured according to DIN EN IEC 62841-4-3
Measuring inaccuracies; according to DIN EN ISO 4871
54-PRO E VARIO
Emission sound pressure level at operator's workplace;
measured according to DIN EN IEC 62841-4-3
Measuring inaccuracies; according to DIN EN ISO 4871
Vibrations
The stated total vibration value has been measured according to a standardised
test procedure and can be used to compare the device with another machine. This
value can be used for a preliminary estimation of the vibration load.
47-PRO E VARIO
Vibrations at the guide bar;
measured according to DIN EN IEC 62841-4-3
Measuring inaccuracies; according to DIN EN 12096
54-PRO E VARIO
Vibrations at the guide bar;
measured according to DIN EN IEC 62841-4-3
Measuring inaccuracies; according to DIN EN 12096
L = 81 dB(A)
24 ORIGINAL SPARE PARTS AND ACCESSORIES
pA
Recommended
3 dB
lithium-ion batteries
L = 83 dB(A)
pA
Recommended
battery chargers
3 dB
Filter
Roller bearing
grease
Conversion kit to
a = 1.1 m/s
2
mulch system
hW
Cutter bar
0.55 m/s
2
a = 0.70 m/s
2
hW
17
BA6720T (12 Ah, 672 Wh)
(Order no. SAB10424)
All approved lithium-ion batteries are listed in the battery
operating instructions
(Order no. SAB10524)
All approved chargers are listed in the battery operating
SAB10124 (47-PRO E VARIO)
SAB10324 (54-PRO E VARIO)
For safety reasons, the cutter bar must always be
replaced by an authorised workshop. This workshop has
the respective spare part number for the cutter bar
available.
0.35 m/s
2
CH7000E (700 W)
instructions
SAE10418
SAA11300